Leica Digimouse - Digitex 8/33 Signal Generator - Digicat 550i Cable Locator - Digitrace Cable Set
Leica Digimouse 731053 |
Digimouse Standard Probe (8 kHz & 33 kHz)
Compact dual frequency probe used to trace drains, sewers, and other non-conducting pipes.
The Digimouse can be attached to various types of tools, including drain unblockers, sewer cleaners, and inspection cameras.
Power supply 1x AA alkaline battery, with a depth of 5 m
Leica Digitex 8/33 Signal Generator |
The DIGITEX 8/33 duel frequency generator is the perfect tracing partner for the DIGICAT 100 service locator. Either place the unit over the service to be traced and activate the induction feature to create a signal or where possible connect the DIGITEX to a valve, junction box, domestic distribution network or other access point of the conductor.
Leica Digicat 550i Cable Locator |
State-of-the-art Digital Signal Processing (DSP) technology
Automatic controls - making the Digicat easy-to-use, requiring minimal user training
Mode Lock - the Digicat starts in the last mode of operation assisting the survey process Hazard Zone feature indicating shallow buried utility in power, 8 kHz, 33 kHz,
Auto, 512 Hz and 640 Hz modes
Leica Digitrace Cable |
The Digitrace has a 30-metre metal detection wire with fibreglass rod on reel. The fibre-optic rod is pushed into the pipe or drain. until the Digitrace locks in, where the blockage accumulates. The Digitex signal transmitter is used to lay a detection signal on the cable, which is located by the Digicat.
AÇIKLAMA
Ürünler faturalı olarak tarafınıza gönderilecektir.
Ürünlerimiz 30 gün süreyle Garantilidir.
Ürün iade süresi 14 gün olup, iade durumunda kargo bedeli alıcıya aittir.
Saat 16:00'ya kadar verilen siparişler aynı gün kargoya verilir.
Pazartesi-Cuma 09:00 - 18:00 mesai saatlerimizdir.
Arayıp da bulamadığınız tüm Network ve Server yedek parçalarını tedarik ediyoruz.
(Cisco, Avaya, Lenova, HP, IBM, Fujitsu, Samsung, Huawei, Enterasys, Juniper, Alcatel, Sun, Qlogic, Dell, Emulex)