Dell PowerVault MD1000 Storage Array, With 2x Power Supplies

 PERC RAID Controllers

PERC 6/E supports RAID levels 0, 1, 5, 6, 10, 50 and 60.

PERC 5/E supports RAID levels 0, 1, 5, 10 and 50.

  Drives and Capacity

Hard Drives

Up to fifteen (15) 1-inch-by-3.5-inch SAS hot-pluggable 3.0 Gbps hard drives, at speeds of 10,000 or 15,000 RPM

Up to fifteen (15) 1-inch-by-3.5-inch SATA II hot-pluggable 3.0 Gbps hard drives, at speeds of 7,200 RPM

Drive speeds and capacities
SAS Drives:

15,000 RPM SAS drives available in 73GB¹, 146 GB¹, 300GB¹ or 450GB¹

10,000 RPM SAS drives available in 300GB¹, 400GB¹ and 600GB¹

Nearline SAS (7,200 RPM) drives available in 500GB¹, 750GB¹ or 1TB²

SATA Drives:

7,200 RPM SATA II drives available in 250GB¹, 500GB¹, 750GB² or 1TB

Energy efficient SATA II (5,400 RPM) drives available in 1TB² and 2TB²

Maximum Capacity (per enclosure)

30TB using fifteen 2TB 5,400 RPM SATA II disk drives in one enclosure

Expansion Capabilities

PERC RAID Controller enables expansion to 6 enclosures

PowerVault MD3000 and MD3000i enable expansion to 3 enclosures

  Connectivity

Support for either of the following configurations:

Unified mode (single path) for daisy chaining of up to 6 enclosures per PERC 6/E controller (3 enclosures per port, single path)

Unified mode (redundant path) for daisy chaining up to 3 enclosures per PERC 6/E controller (3 enclosures connected to both ports via redundant path cabling)

Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 though 6 and a separate connectivity to drives 7 through 14

  Enclosure Management Modules (EMM)

EMMs

1 or 2 modules

A second EMM provides redundant enclosure management capability

  Back-Panel Connectors

SAS connectors (per EMM)

1 12.0 Gbps SAS (SFF 8470) "IN" connector for connection to the host

1 12.0 Gbps SAS (SFF 8470) "OUT" connector for expansion to an additional enclosure

Serial connector (per EMM)

1 6-pin UART mini-DIN connector (for factory use only

  LED Indicators

Front panel

1 two-color LED indicator for system status

2 single-color LED indicators for power and split mod

Hard-drive carrier

1 single-color activity LED

1 two-color LED status indicator per drive

EMM

3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status

Power supply/cooling fan module

3 LED status indicators for power supply status, power supply/fan fault and AC status

  Power Supplies

Wattage

488 W maximum continuous; 550 W peak

Heat dissipation

200 W

Voltage

100-240 V rated (actual 90-264 V)

Frequency

47-63 Hz

Amperage

7.2 A at 100 V, 3.6 A at 200 V

  Available Hard Drive Power (per slot)

Supported consumption

Up to 1.3 A at +12 V; Up to 1.5 A at +5 V

  Physical

Height

13.11 cm (5.16 inches)

Width

44.63 cm (17.57 inches)

Depth

48.01 cm (18.9 inches)

Weight

35.37 kg (78 lb) (maximum configuration)

  Environmental

Temperature:

Operating: 10° to 35°C (50° to 95°F)

Storage: -40° to 65°C (-40° to 149°F)

Relative humidity

Operating: 20% to 80% (non-condensing)

Storage: 5% to 95% (non-condensing)

Altitude

Operating: -16 to 3048 m (-50 to 10,000 ft)

Storage: -16 to 10,600 m (-50 to 35,000 ft)

BTU per hour

1430